AMP INC.: Memory Products: 2.5" SATA III SSD SATAQUEST Series-Client II Class MLC, 5V

AMP Inc. products - SATA Drives

2.5 inch SATA III SSD SATAQUEST Series-Client II Class

2.5" SATA III SSD
SATAQUEST Series-Client II Class
MLC, 5V >> AMP Inc. Presentation (9.23MB Powerpoint download)

The AMP Inc. 2.5" SSD is a flash based disk drive with SATA 3.0 compliant interface. It provides fast read and writes speed, high reliability and data protection makes it an ideal storage solution for the server and mobile environment. It is built with Multi Level Cell (MLC) NAND Flash which is cost effective and good performance. Due to its non mechanical nature, it has higher shock resistant and lower access time than traditional rotating hard disk. Built-in ECC and EDC ensure error-free transactions for the most demanding applications.

FORM FACTOR

2.5" Type (100.20 x 69.85 x 9.50) mm

DENSITY

25GB, 50GB, 60GB, 100GB, 120GB, 200GB, 240GB, 400GB, 480GB

HOST INTERFACE

SATA 3.0 Compliant, 6 GB/s, 3 GB/s and 1.5 GB/s support
Native Command Queuing (up to 32 commands)
SMART Command Transport (basic)

PERFORMANCE

Sequential Read & Write transfer: Up to 500MB/s (@128K blocks)
Random Read IOPS: 60,000(@4K blocks)

RELIABILITY

Technology
DuraClass technology represents a set of NAND flash management features that work in tandem to deliver world class SSD reliability, performance and power efficiency that differentiate AMP Inc.'s SSD's from competitive solutions. Of particular importance is the use of processing elements to optimally overcome a number of the inherent issues associated with commodity NAND flash memory. Duraclass features includes:

DuraWrite, which optimizes the number of program cycles to the flash effectively extending flash rated endurance by 20x or more when compared to standard controllers.
RAISE (Redundant Array of Independent Silicon Elements), which deliver an orders-of-magnitude improvement in drive reliability versus today's best enterprise HDDs and SSDs. The result is single-drive RAID-like protection and recovery from potentially catastrophic flash block failures - all while avoiding the inefficiencies of traditional RAID.
Advanced Wear Leveling and Monitoring, Optimized wear leveling algorithms further extending flash endurance.
Advanced Read/Program Disturb Management, which safeguards against errant re-programming of cells during read and program cycles.
Recycler, which intelligently performs garbage collection with the least impact on flash endurance.

MTBF (Mean Time between Failures)
2M hours (MAX), True MTBF calculations must be based on configuration and usage requirements.

ECC Recovery
Up to 55 bytes correctable per 512-byte sector. (BCH)

Unrecoverable Read Errors
Read unrecoverable bit error rate (UBER) 10e-17

Data Encryption
256-bit AES-compliant
TCG Enterprise

Protect Health Monitoring
Self-Monitoring, Analysis and Reporting Technology (SMART)

Operating System
Windows XP 32-Bit and 64-Bit; Windows Vista 32-Bit & 64Bit; Windows 7 32-Bit & 64-Bit; Linux

Power Requirements
Standard SATA Power Connector 5V

Performance Optimization
TRIM (requires OS support)

POWER CONSUMPTION

Input voltage: +5VDC, 5% (4.75V ∼ 5.25V)
3W in operation
1.5W in standby

ENVIRONMENTAL

Temperature
Operating: 0°C ∼ 70°C (Commercial)

-40°C ∼ 85°C (Industrial)

Shock
Operating: 50G, duration 11ms, Half Sine Wave
Non-Operating: 1500G, duration 0.5ms, Half Sine Wave

Vibration
Operating: 16.4G Peak, 10∼2000Hz, x3 Axis

RoHS

RoHS Compliant (Lead Free)

SPECIFICATION SUMMARY TABLE

Drive Specification
Capacity	25GB - 480GB
Sustained data transfer rate(read)	500 MB/sec
Sustained data transfer rate(write)	500 MB/sec
Channels	8
Media type	Multi Layer Cell (MLC) NAND Flash, eMLC
Random 4K IOPS(read)	60 K
Random 4K IOPS(write)	60 K
Interface	Serial ATA 3.0
I/O data-transfer rate	600 Mbytes/sec
ATA data-transfer modes supported	PIO modes 0-4, Ultra DMA modes 0-6
Height	9.50 ± 0.1mm
Width	69.85 ± 0.1mm
Length	100.2 ± 0.1mm
Weight (grams)	78
Continue read power (Typical)**	3.0 watts
Continue write power (Typical)**	3.4 watts
Idle mode power (Typical)**	1.5 watts
Standby mode power (Typical)**	1.5 watts
Sleep mode power (Typical)**	0.5 watts
Voltage tolerance (including noise)	5V ± 5%
Ambient temperature	0° to 70°C Commercial Temperature -40° to 85°C Industrial Temperature
Temperature gradient	20°C (operating)
Relative humidity (non-condensing)	50% to 95% (non-operating)
Relative humidity gradient	30% per hour max
Drive acoustics, sound power (dB)	0
Non-recoverable read errors	< 1 per 10¹⁷ bits read
Mean Time Before Failure (MTBF)	2 M hours (max)
Altitude	0-80000(ft)/0-24(km.)
Service life	5 years
Warranty	3 years

1317 E. Edinger Avenue, Santa Ana, CA 92705, USA | 714.460.9800 | sales@ampinc.biz | © 2012 All Rights Reserved

Quality Management Systems ISO 9001 - 2008
Environment Managed ISO 14001 - 2004