Quality, Reliability, Long Term SupportHomeSite Map
AMP Inc - Memory solutions for today's world
spacer
AMP Inc. products - SATA Drives
 
SATAQUEST Series
2.5" SATA III Solid State Drive (SSD)
Military Class                                >> AMP Inc. Presentation (9.23MB Powerpoint download)
 
The AMP Inc. 2.5" SSD is a flash based disk drive with SATA 3.0 compliant interface. It provides fast read and writes speed, high reliability and data protection makes it an ideal storage solution for the server and mobile environment. It is built with Single Level Cell (SLC) NAND Flash which is cost effective and good performance. Due to its non mechanical nature, it has higher shock resistant and lower access time than traditional rotating hard disk. Built-in ECC and EDC ensure error-free transactions for the most demanding applications.
 
SATAQUEST Series 2.5 inch SATA III Solid State Drive (SSD) Military Class
Part NumberCapacity
AMP25T030-NS87BI30GB
AMP25T060-NS97BI60GB
AMP25T120-NS97BI120GB
AMP25T240-NS17BI240GB
* I = Industrial Temperature
* S = SLC
 
DENSITY
30GB, 60GB, 120GB, 240GB
FORM FACTOR
2.5" Type (100.20 x 69.85 x 9.50) mm
HOST INTERFACE
SATA 3.0 Compliant, 6 GB/s, 3 GB/s and 1.5 GB/s support
Native Command Queuing (up to 32 commands)
SMART Command Transport (basic)
PERFORMANCE
Sequential Read & Write transfer: Up to 500MB/s (@128K blocks)
Random Read IOPS: 60,000(@4K blocks)
Random Write IOPS: Up to 60,000 burts/20,000 sustained (@4KB blocks)
PCMark Vantage: Up to 60,000 (HDD test suite score)
RELIABILITY
Technology
DuraClass technology represents a set of NAND flash management features that work in tandem to deliver world class SSD reliability, performance and power efficiency that differentiate AMP Inc.'s SSD's from competitive solutions. Of particular importance is the use of processing elements to optimally overcome a number of the inherent issues associated with commodity NAND flash memory. Duraclass features includes:
  • DuraWrite, which optimizes the number of program cycles to the flash effectively extending flash rated endurance by 20x or more when compared to standard controllers.
  • RAISE (Redundant Array of Independent Silicon Elements), which deliver an orders-of-magnitude improvement in drive reliability versus today's best enterprise HDDs and SSDs. The result is single-drive RAID-like protection and recovery from potentially catastrophic flash block failures - all while avoiding the inefficiencies of traditional RAID.
  • Advanced Wear Leveling and Monitoring, Optimized wear leveling algorithms further extending flash endurance.
  • Advanced Read/Program Disturb Management, which safeguards against errant re-programming of cells during read and program cycles.
  • Intelligent "Recycling" for advanced free space management (Garbage Collection)
  • Intelligent Data Retention optimization
  • Military Secure Erase
MTBF (Mean Time between Failures)
5,000,000 operating hours
Support industrial life cycle (up to 10+years).
 
ECC Recovery
Up to 55 bytes correctable per 512-byte sector. (BCH)
 
Unrecoverable Read Errors
Read unrecoverable bit error rate (UBER) 10e-17
 
Data Encryption
256-bit AES-compliant
TCG Enterprise
 
Protect Health Monitoring
Self-Monitoring, Analysis and Reporting Technology (SMART)
 
Operating System
Windows XP 32-Bit and 64-Bit; Windows Vista 32-Bit & 64Bit; Windows 7 32-Bit & 64-Bit; Linux
 
Power Requirements
Standard SATA Power Connector 5V
 
Performance Optimization
TRIM (requires OS support)
ENVIRONMENTAL
Temperature
Operating: -40°C ∼ 85°C (Industrial)
 
Shock
Operating: 50G, duration 11ms, Half Sine Wave
Non-Operating: 1500G, duration 0.5ms, Half Sine Wave
 
Vibration
Operating: 16.4G Peak, 10∼2000Hz, x3 Axis
COMPLIANCE
RoHs, Halogen-Free, Green
SPECIFICATION SUMMARY TABLE
Drive Specification
Capacity30GB - 240GB
Sustained data transfer rate (read)500 MB/sec
Sustained data transfer rate (write)500 MB/sec
Channels8
Media typeSingle Layer Cell (SLC) NAND Flash, eMLC
Random 4K IOPS (read)60 K
Random 4K IOPS (write)60 K
InterfaceSerial ATA 3.0
I/O data-transfer rate600 Mbytes/sec
ATA data-transfer modes supportedPIO modes 0-4, Ultra DMA modes 0-6
Height9.50 ± 0.1mm
Width69.85 ± 0.1mm
Length100.2 ± 0.1mm
Weight (grams)78
Continue read power (Typical)**3.0 watts
Continue write power (Typical)**3.4 watts
Idle mode power (Typical)**1.5 watts
Standby mode power (Typical)**1.5 watts
Sleep mode power (Typical)**0.5 watts
Voltage tolerance (including noise)5V ± 5%
Ambient temperature-40° to 85°C Industrial Temperature
Temperature gradient20°C (operating)
Relative humidity (non-condensing)50% to 95% (non-operating)
Relative humidity gradient30% per hour max
Drive acoustics, sound power (dB)0
Non-recoverable read errors< 1 per 1017 bits read
Mean Time Before Failure (MTBF)5,000,000 operating hours
Altitude0-80000(ft)/0-24(km.)
Service life5 years
Warranty3 years
** Typical value under room temperature


1317 E. Edinger Avenue, Santa Ana, CA 92705, USA | 714.460.9800 | sales@ampinc.biz | © 2012 All Rights Reserved
 
ISO 9001: 2008 and ISO 14001: 2004 Registered FirmQuality Management Systems ISO 9001 - 2008
Environment Managed ISO 14001 - 2004