 |
CineDrive
|
The AMP Inc. CineDrive is a flash based disk drive with SATA 2.0
interface designed and optimized for the video recording industry.
It provides excellent capture data rate for use in applications
requiring up to 4-2-2 1080P uncompressed recording capability.
Due to its non mechanical nature, it has higher shock resistance and
lower access time than traditional rotating hard disk. | ||||||||
| DENSITY | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 64GB, 128GB | |||||||||
| FORM FACTOR | |||||||||
| 2.5" Type (100.20 x 69.85 x 9.50) mm | |||||||||
| HOST INTERFACE | |||||||||
| PIO Mode 0 to 4 UDMA Mode 0 to 6 Serial ATA 3.0 specification ATA - 7 Standard Compliant | |||||||||
| PERFORMANCE | |||||||||
| Host Interface: Max 300MB/s Sustained Read transfer: 230MBps Sustained Write transfer: 225MBps Access time: < 0.1ms | |||||||||
| RELIABILITY | |||||||||
This drive uses dynamic static and active (initiative) balanced wear leveling strategy, which will ensure that all blocks have nearly same wear level, and reduce the dependence of the write endurance on access pattern. Write endurance: > 10 years@ 1 TBytes/day (32GB type) Read endurance: unlimited This drive also implements an enhanced ECC algorithm, which reduces the error rate and enforces the write endurance at same time. This drive has a certain number of reserved blocks. When user data block fails, a reserved block will replace the failed block. The replacement of bad block is transparent to user. More than 2,000,000 hours (32GB typical) Calculation model: Telcordia SR-332 Issue 1 Method 1, Case 1 Data retention: > 10 years | |||||||||
| POWER CONSUMPTION | |||||||||
| Input voltage: +5VDC, 5 %( 4.75V ∼ 5.25V) Continue write: Typical 400mA Continue read: Typical 400mA Idle: Typical 200mA Standby: Typical 200mA Test under room temperature @ 5V | |||||||||
| ENVIRONMENTAL | |||||||||
| Temperature Operating: 0°C ∼ 70°C (Commercial) Non-Operating: -40°C ∼ 85°C Shock Operating: 50G, duration 11ms, Half Sine Wave Non-Operating: 1500G, duration 0.5ms, Half Sine Wave Vibration Operating: 16.4G Peak, 10∼2000Hz, x3 Axis | |||||||||
| RoHS | |||||||||
| RoHS Compliant (Lead Free) | |||||||||
1317 E. Edinger Avenue, Santa Ana, CA 92705, USA | 714.460.9800 | sales@ampinc.biz | © 2012 All Rights Reserved
Quality Management Systems ISO 9001 - 2008
Environment Managed ISO 14001 - 2004
Quality Management Systems ISO 9001 - 2008Environment Managed ISO 14001 - 2004